in

DIY Coolsculpting At Home

Fat is a problem to many people and most of them would like to know how they can get rid of it fast. A good way of getting rid of the fat is through coolsculpting. For those who do not have much money to spend, they can opt to use a diy coolsculpting kit at home.

The procedure mainly focuses mainly on freezing fat and not burning it. The skin is cooled for an hour and when the fat cells are exposed to the cold, they die. If coolsculpting is done for a period of three months, about 30 to 80 percent results can be achieved.

 

The basics of DIY coolsculpting

Most people who try coolsculpting at home use ice cubes, which is not the best option since coolsculpting needs uniform and extended cooling. Ice cubes cannot offer cooling for long periods.  The body cells also need a temperature of 39 degrees Fahrenheit to die. There is a unique way in which one can get the desired results.

The first thing you need to do is to place aluminum plates in the refrigerator, preferably in the freezer. Add glycol in the water and freeze the mixture for the entire night.

Get yourself some gel packs and seal them. Place the gel packs in the freezer for the whole night. The gel packs will be placed in the water and glycol mixture to maintain the temperature of the packs.

Cover the target area with a piece of cloth to prevent it from harm.  The role of the aluminum plates in diy coolsculpting is to ensure that the fat area you are targeting is in between the plates, this is for compression to take place. You first need to determine the compression level. You can now place the gel packs in the area where you want to lose the fat. The temperature should be uniform.

Using a Lipobelt for Coolsculpting At Home

Another method of coolsculpting is by the use of lipobelt. A lipobelt is a system for body contouring and it uses an advanced cold technology which is ideal for do it yourself coolsculpting. This technology has been approved by the FDA for use at home. The belt has cold packs which cools fat cells and end up getting rid of them. After the treatment, the fat cells that were subjected to cooling are removed naturally for some weeks.

After 3 to 10 weeks, the results are visible. The lipobelt is cheaper compared to the procedure done in the clinic by a doctor. The diy coolsculpting belt is natural therefore there is no need for needles, medicine, scars or side effects. It only takes a few seconds to put on the belt and you can try to use it three times a week for 1 hour. This can be done when reading, responding to emails or even when cooking.  The belt produces very impressive results.

Buying the Coolsculpting Machine

The other option is to buy the coolsculpting machine and use it at home. This is much cheaper than getting the procedure done at a clinic. The advantage of this option is that it is safe and will not result in you harming yourself.

The key thing is that you will have to learn how to operate the DIY bodysculpting machine. This might take some time to do but it is possible. Once you learn how to use it, you can administer it on different parts f your body. You can also let your close friends and relatives use the machine.

The diy coolsculpting machine will last for years. Most of them are tailored for people with busy lifestyles, so you can use them whenever you are free. You can put them on and take them off at the end of the session and then continue using them when you are free.

Keep in mind that even if you are using the lipo freeze machine at home, you still need to combine it with diet and exercise, so as to reap maximum results from it and achieve your idea figure.

Before trying out coolsculpting at home, ensure that you get as much information as possible.  Make sure you know the disadvantages of doing the procedure on your own.

Leave a Reply

Gynecomastia Surgery Scars Removal

Types Of Liposuction NZ Procedures